Related Posts
The workday is done

My base loc is Bengaluru, but currently I am not mandatorily required to work from office, and have been working from home since I joined Deloitte in July. Should I talk to my manager and go back to my hometown Kolkata and work from there? Staying in PG all day and working from here is not quite feasible for me. Suggest pls. Deloitte India
Thoughts on gme
3/23 Thread (General):
Additional Posts in Engineering
What's a guilty pleasure you indulge in at work?
New to Fishbowl?
unlock all discussions on Fishbowl.




I understand that the only way to work with a degree from Mexico in the USA as an engineer is for a company to take care of everything, otherwise, you must obtain your wet stamp. Greetings.
If I understand correctly, you are looking to become a licensed Professional Engineer (i.e. an engineer who can seal documents) in the United States. If that is correct:
Licensure is granted by State Boards of Professional Engineers. Look at the requirements for licensure for the state(s) you would like to be licensed in.
As for actual requirements for licensure, they will vary from state to state. Here is a general list of what you could expect. You need to confirm with the pertinent state's Board of PEs. Most likely you will need to provide:
- Your University transcript for the Board to review. They may well not accept it, in which case you're out unless you can obtain a degree from an institution that they will accept.
- a Fundamentals of Engineering exam (FE Exam) pass. This test is only administered by NCEES.
- a Principles of Professional Engineering exam (PE Exam) pass. This test is only administered by NCEES.
- At least 4 years of engineering work supervised by a licensed professional engineer within the state you would like to receive licensure (I don't know if you'll be able to use your experience from outside the USA for this). The length of experience will vary based on the state and your degrees.
- At least 3 recommendations from licensed professional engineers in the state you would like to receive licensure. You need a recommendation from all engineers that supervised your work.
Find the website of the Board of Professional Engineers for the State you're interested in receiving licensure, see what their requirements are, then if you think you can become eligible, start communicating with them. I would not be surprised if you just won't be able to get licensed unfortunately - it can be difficult for foreigners to do so.
Good luck!